用背离看波段买卖幅图 源码 有未来函数做参照

以下是用背离看波段买卖幅图 源码 有未来函数做参照

用背离看波段买卖幅图 源码 有未来函数做参照

我们炒股就是要用波段进行买卖.在K线图只有看清楚.背离才能比较及时的买卖.这个公式的参数，可以根据你的自选股的特性.调整和适的参数.因为K线也是操盘手编辑出来的.因此不同的操盘手.每个股必然具有不同的特性.你就可以按照你的理解.调整适合的参数.

下面是源码

INPUT:K(9,0,120);
 DRAWGBK(C,Strip(RGB(0,0,0),RGB(0,0,0),0));
 {-----------波段----------}
DRAWTEXTABS(10,10,'■可考察股性调整【线性回归预测(C,K)】的参数.当前【"'+STKLABEL+'"参数.K='+K+'】'),COLOR00FFFF,LINETHICK2,LAYER0;
 PC:((2*C+H+L+(2*C-H-L))/4+AMOUNT/vul/100)/2,COLOR00FFFF,linethick0;
 JC9:(FORCAST(PC,K)+WMA(PC,K)+EMA(PC,K/2)+MA(PC,K/2))/4,linethick0;;
 LLX:=llV(JC9,2);
 DRAWGBK(JC9<>LLX,STRIP(RGB(0,0,255),RGB(60,0,50),0)),LAYER0; {-------波段背景------};
 {----------波段辅助看透乖离率的背离----------}
JC99:=(PC-JC9)/JC9*100;
 LLX2:=(PC-LLX)/LLX*100;
 PARTLINE(JC99,JC99=LLX2,rgb(0,255,255),JC99<>LLX2,rgb(255,0,0)),linethick2,LAYER0;
 FILLRGN(JC99,0,JC99=LLX2,rgb(0,40,0),JC99<>LLX2,rgb(80,0,80)),layer7;
 {补充和预判主线}
PMA:(PC-FORCAST(PC,K))/FORCAST(PC,K)*100,COLOR00FFFF,DOTLINE;
 {显示背离}
gj:=MAX(C,O);
 L4:=LLV(gj,5);
 gt:=JC99>REF(JC99,1) AND REF(JC99,1)<REF(JC99,2);
 A1:=BARSLAST(REF(gt,1));
底背离:=REF(L4,A1+1)>CLOSE AND JC99>REF(JC99,A1+1) AND gt;
 DRAWTEXT(底背离,JC99-2.,'▼'),ALIGN1,COLOR00FF00,LINETHICK1,LAYER0;
 DRAWTEXT(底背离,JC99-2.5,''+NUMTOSTRN((L+C)/2,2)+'←底背'),ALIGN1,Culor00FF00,linethick1;
 STICKLINE( 底背离,JC99,JC99-2,0.5,0 ),color00FF00 ;
 H4:=HHV(gj,5);
 gt2:=JC99<REF(JC99,1) AND REF(JC99,1)>REF(JC99,2);
 A2:=BARSLAST(REF(gt2,1));
顶背离:= REF(H4,A2+1)<H4 AND JC99<REF(JC99,A2+1) AND gt2;
 DRAWTEXT(顶背离,JC99+2,'▲'),ALIGN1,COLOR00ffFF,LINETHICK1,LAYER0;
 DRAWTEXT(顶背离,JC99+2.5,''+NUMTOSTRN((H+C)/2,2)+'←顶背'),ALIGN1,Culor00ffFF,linethick1;
 STICKLINE( 顶背离,JC99,JC99+2,0.5,0 ),color0089FF ;

 {--------未来函ZIG仅仅用于对着波段调整参数---------}
ZF:=10;
 Z10:=ZIG(4,ZF);
 {PARTLINE(Z10,Z10>=REF(Z10,1),rgb(255,0,0),Z10<REF(Z10,1),rgb(0,255,0)),DOTLINE;}
 Low1:=TROUGH(4,10 ,1);
 High1:=PEAK(4,10,1);
 0,COLOR00FFFF,DOTLINE;
 DRAWLINE(Z10=Low1,0,Z10=High1,0,0),COLOR0000FF,LINETHICK2;
 DRAWLINE(Z10=High1,0,Z10=Low1,0,0),COLOR00Ff00,LINETHICK2;
 STICKLINE(Z10=Low1,0.5,-0.5,2,0),COLOR00FF00,LAYER0;
 STICKLINE(Z10=High1,0.5,-0.5,2,0),COLOR0000FF,LAYER0;
 STICKLINE(barstatus=2 ,0.5,-0.5,2,0),COLOR00FFFF;